|
|
|
|
| Miniature spectrometer getSpec 2048 x 14 for UV, VIS and NIR range | |
|
|
 Request for information
The getSpec-2048x14 Fiber Optic Spectrometers is a back-thinned type CCD spectrometer with high quantum efficiency and high UV sensitivity. The optical design is based on the getBench-75 symmetrical Czerny-Turner design with a 2048x14 pixels high UV sensitive CCD image sensor. The image sensor is used as a linear array of 2048 pixels binning the vertical 14 pixels to optimize efficiency. The spectrometer has a fiber optic entrance connector (standard SMA, others possible), collimating and focusing mirror and a diffractional grating. A choice of 16 different gratings with different dispersion and blaze angles enable applications in the 200-1160nm range. The getSpec-2048x14 comes with a 16 bit AD converter, and USB2.0 high speed interface.
The getSpec-2048x14 is especially suitable for measuring low light, fluorescence and UV- applications. Digital IO ports enable external triggering and control of shutter and pulsed light sources from the getSpec product range.
The new getSpec-2048x14 has a USB2 interface with fast data sampling of 450 spectra per second and data transfer in 2.24 msec and supports analog in-and outputs as well. Optional BluetoothÒ (-BT) communication and an SD card for on-board saving of spectra can be added. The getSpec-2048x14-USB2 runs on USB power and comes with getSoft basic, a complete manual and USB interface cable. Multiple (up to 127) USB2 spectrometers with different detector types can be externally coupled.
| Technical Parameters |
| Optical Bench | Symmetrical Czerny-Turner, 75 mm focal length |
| Wavelength range | 200-1160 nm |
| Resolution | 0.04 –20 nm, depending on configuration |
| Stray light | < 0.1% |
| Sensitivity (getLight-HAL, 8 µm fiber) | 16000 counts/µW (16-bit AD) -per ms integration time |
| UV Quantum efficieny | 35-65% (200-300nm) |
| Detector | Back-thinned CCD image sensor 2048x14 pixels |
| Signal/Noise | 500:1 |
| AD converter | 16 bit, 1.5 MHz |
| Integration time | 2.24 msec – 10 minutes |
| Data transfer speed | 2.24 msec / scan |
| Sample speed with on-board averaging | 2.24 msec / scan |
| Interface | USB 2.0 high speed, 480 Mbps or RS-232, 115.200 bps |
| Digital IO | HD-26 connector, 2 Analog in, 2 Analog out, 3 Digital in, 12 Digital out, trigger, sync. |
| Power supply | default USB power, 350 mA or with SPU2 external 12VDC, 350 mA |
| Dimensions, weight | 175 x 110 x 44 mm (1 channel), 716 grams |
|
|
|
|
Last change 06/19/2008
Copyright (c) getAMO 2024
|
|
|
|